Ricoh Pro C7100sx 첫 번째 매뉴얼 읽기 - 페이지 18

{카테고리_이름} Ricoh Pro C7100sx에 대한 첫 번째 매뉴얼 읽기을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro C7100sx 40 페이지.
Ricoh Pro C7100sx에 대해서도 마찬가지입니다: 시작 설명서 (40 페이지)

2. Safety Information for This Machine

• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around

the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

• When performing maintenance on the machine, always disconnect the power cord from the

wall outlet.

Handling the main machine

This section explains safety precautions about handling the main machine.

• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy

disconnection of the power cord in the event of an emergency.

• If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power

immediately. After turning off the power, be sure to disconnect the power cord plug from the

wall outlet. Then contact your service representative and report the problem. Do not use the

machine. Doing so could result in fire or electric shock.

• If metal objects, or water or other fluids fall inside this machine, you must turn off its power

immediately. After turning off the power, be sure to disconnect the power cord plug from the

wall outlet. Then contact your service representative and report the problem. Do not use the

machine. Doing so could result in fire or electric shock.

• Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could

result in electric shock.

• The following explains the warning messages on the plastic bag used in this product's

packaging.

• Keep the polythene materials (bags, etc.) supplied with this machine away from babies

and small children at all times. Suffocation can result if polythene materials are brought into

contact with the mouth or nose.

• Unplug the power cord from the wall outlet before you move the machine. While moving the

machine, take care that the power cord is not damaged under the machine. Failing to take these

precautions could result in fire or electric shock.

• After you move the machine, use the caster fixture to fix it in place. Otherwise the machine might

move or come down to cause an injury.