Ricoh Pro L4160 매뉴얼 인쇄
{카테고리_이름} Ricoh Pro L4160에 대한 매뉴얼 인쇄을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro L4160 8 페이지. Wide format color digital imaging system
Ricoh Pro L4160에 대해서도 마찬가지입니다: 안전 주의사항 (17 페이지), 사양 (4 페이지), 관리 및 유지보수 매뉴얼 (29 페이지)
페이지 인쇄
RICOH Pro L4130/L4160 Print Guide
Thank you for purchasing our printer cutter RICOH Pro L4130/L4160.
This "Print Guide" explains the printing method using RICOH Pro L4130/L4160 and the attached software RIP
[RICOH Software RIP] and items to be checked/set before printing.
First, confirm the following items:
Before printing, the preparation for RICOH Pro L4130/L4160 and the software RIP [RICOH Software RIP] is
required.
First, prepare the followings:
About system configuration (Refer to P. 2)
The explanation of the system configuration to print is described.
Prepare RICOH Pro L4130/L4160 (Refer to P. 3)
To use RICOH Pro L4130/L4160, the items below are explained:
Connect the PC in which the software [RICOH Software RIP] has been installed with
RICOH Pro L4130/L4160.
Turn on the power supply.
Depending on the media to be set, adjust the print head height etc.
Set the media.
Perform test printing to check whether there is no nozzle clogging etc.
Correct the feeding rate of media.
Correct the ink drop position.
Prepare the RICOH Software RIP (Refer to P. 4)
The preparation of the software [RICOH Software RIP] is explained.
For the installation method, refer to the manual of the RICOH Software RIP.
The printing method using a sample is
explained.
Here, the printing method using a sample image included in the attached CD.
Perform printing (Refer to P. 5)
Some typical questions are described.
Typical questions (Refer to P. 7)