Ricoh Rh 100 사용 설명서 - 페이지 3
{카테고리_이름} Ricoh Rh 100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Rh 100 26 페이지.
Ricoh Rh 100에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지)
페이지 인쇄
Precautions when using the machine
•
When installing the machine, provide a gap of at least 5 cm (about 1.9 inches)
between each of the left and right sides and the rear and other objects.
•
Do not put anything on top of the machine (except for the printer Ri 100).
•
If the temperature inside the machine rises, a malfunction will result. Do not block
the vents (left, right, and back sides of the machine) by placing or leaning objects
against them.
•
Do not surround the finisher with inflammables with the ignition point of 200 °C
(392 °F) or lower.
•
This machine has a heater auto-off function. If you do not open the front cover
or operate the mode switching lever for 15 minutes after the set temperature is
reached by the heating operation, the heater power is automatically turned off.
•
Use this machine indoors.
•
Use this machine in a place where sufficient ventilation is available.
•
When using multiple units, do not stack them.
•
Remove the protective cover before inserting the cassette into the finisher.
•
Before heat processing starts, do not touch with your hands the surface where
ink is applied.
•
When you leave from the finisher for an hour or longer after using it or when you
do not use it, make sure to turn the power switch (red) off and unplug the cord.
•
As the A4 standard tray and A5 tray becomes hot when continuously used on the
finisher, give an interval of five minutes or longer to set them after they are pulled out.
•
Take out the cassette from the finisher soon after pressing (smoothing wrinkles/flatten-
ing fibers) or fixing ink is completed. Leaving the cassette in the hot finisher for a long
time may cause the cassette to malfunction.
DSA132
DSA065
3