Ricoh Ri 1000 문제 해결 매뉴얼 - 페이지 12

{카테고리_이름} Ricoh Ri 1000에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Ri 1000 27 페이지. Procedure for long-term storage
Ricoh Ri 1000에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 사용자 유지 관리 매뉴얼 (7 페이지), 매뉴얼 (22 페이지)

페이지 인쇄
Ricoh Ri 1000 문제 해결 매뉴얼
11) Ink Supply error
12) Ink level feeler position error
Maintenance
station is not
drawing ink
correctly - (if this
error is on all or
most channels)
Air release solenoid
did not operate
If this error on one
head and nozzle
check is also bad
Maintenance
station is not
drawing ink
correctly - (if this
error is on all or
most channels)
Carriage in wrong
position to detect
feeler
One of the feelers
on the carriage is
obstructed
Check connections on the
maintenance station. (See Detail
below) Make sure the motor is
connected properly and the home
position optical sensor is
connected properly
Clean the maintenance station
(refer to user manual 8.2
Maintenance)
Restart the printer to set correct
capping position
If continues - after restart and
clean - replace maintenance
station
Check this operation by
performing a strong clean - should
see solenoid activate during the
clean - (see Detail below) - if the
solenoid does not activate -
replace this assembly
Head could be clogged - replace
carriage
Check connections on the
maintenance station. (Refer to the
pictures in Detail for 10) Make sure
the motor is connected properly
and the home position optical
sensor is connected properly
Clean the maintenance station
(refer to user manual 8.2
Maintenance)
If continues - after restart and
clean - replace maintenance
station
Restart the printer to set correct
capping position
Check the encoder and clean and
check for large scratches - replace
if necessary
Release the carriage and make
sure that the feeler for that
channel is not obstructed (see
picture in Detail for 7)