Cisco Unified 7905G 참조 매뉴얼 - 페이지 10
{카테고리_이름} Cisco Unified 7905G에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Unified 7905G 20 페이지. Ip talk series
Cisco Unified 7905G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (25 페이지), 전화 매뉴얼 (46 페이지), 빠른 참조 (2 페이지), 네트워크 설정 구성 (34 페이지), 사용자 설명서 (20 페이지)
페이지 인쇄
To enable/Modify Call forwarding from a
Remote location
Dial the number for Remote Access to
•
Call Forwarding or dial your phone number and
press * at the message
Enter your complete telephone number + #. If your
•
phone is configured as an extension-only (i.e.,
non-DID) line, enter your organization's complete
main telephone number + * + your extension
number + #.
Enter your telephone password + #
•
Enter the new forwarding number + #. For
•
external numbers use the Outside Access Digit,
usually 9.
After hearing the verification, hang up
•
To Disable Call forwarding using the Menu
Press the CFwdAll softkey
•
Press the EndCall softkey
•
To Disable Call forwarding using star Codes
Lift the handset and dial 73*
•
After hearing the verification, hang up
•
To Disable Call forwarding from a
Remote location
Dial the number for Remote Access to Call
•
Forwarding or dial your phone number and press
* at the message
Enter your complete telephone number + #
•
Enter your telephone password + #
•
Press ##
•
After hearing the verification, hang up
•
Call foRWaRD (bUsY)
Call Forward (Busy) forwards calls to another number
when you are already on a call.
To enable/Modify Call forward (busy)
Lift the handset and dial 76*
•
Enter the extension or phone number for the
•
forwarding destination followed by #. For external
numbers, use the Outside Access Digit.
6