Ricoh Ri 6000 안전 정보 및 빠른 설치 매뉴얼 - 페이지 8
{카테고리_이름} Ricoh Ri 6000에 대한 안전 정보 및 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Ri 6000 24 페이지. Direct to garment printers
페이지 인쇄
•
When unplugging the machine, always pull the plug, not the cord. Pulling the cord can damage it. Use of a
damaged power cord could result in fire or electric shock.
•
Be sure to push the power plug fully into the wall outlet. A partially inserted plug creates an unstable
connection that can result in an unsafe buildup of heat.
•
Be sure to disconnect the plug from the wall outlet and clean the pins and the area around the pins at least
once a year. Allowing dust to build up on the plug constitutes a fire hazard.
•
When maintaining the machine, always turn off the power at the back of the machine.
Power source
•
100-240V, 2A, 50/60Hz
Voltage must not fluctuate more than 10%.
Please be sure to connect the power cable to a power source as above.
Confirm that the wall outlet is near the machine and freely accessible, so that in event of an emergency, it can
be unplugged easily.
Handling the main machine
•
Keep infants away from polythene materials (bags, etc.) used to wrap the machine and its accessories.
Suffocation may result if polythene materials are brought into contact with the mouth or nose.
•
If the machine emits smoke or odor, or if it behaves unusually, you must turn off its power immediately. After
turning off the power, be sure to unplug the machine. Then contact your service representative and report
the problem. Do not use the machine. Doing so could result in fire or electric shock.
•
If a metal object, water or some other fluid gets inside the machine, you must turn off its power immediately.
After turning off the power, be sure to unplug the machine. Then contact your service representative and
report the problem. Do not use the machine. Doing so could result in fire or electric shock.
•
Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could result in electric
shock.
•
The machine weights around 81.6 kg (180 lb.).
•
Four or more people are required to lift the printer. When moving the printer, lift it slowly so that you do not
strain yourself. Lifting the printer forcibly or handling it roughly to drop it will risk injury.
6