Cisco Unified 7912G 사용자 설명서 - 페이지 10

{카테고리_이름} Cisco Unified 7912G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Unified 7912G 16 페이지. Ip talk series
Cisco Unified 7912G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 전화 매뉴얼 (46 페이지), 빠른 참조 (2 페이지), 네트워크 설정 구성 (34 페이지), 한눈에 보기 (20 페이지), 참조 매뉴얼 (20 페이지), 설치 매뉴얼 (8 페이지), 빠른 참조 (4 페이지)

Using the Speaker

The Cisco IP Phone 7905G and 7912G each provide a speaker for hands-free

listening. You can use the speaker only to listen to a call. To talk on a call, you

must pick up the handset.

If you want to...

Listen to the other party on the

speaker

Listen to the other party using the

handset

Turn off the speaker and hang up

Adjust the volume on the speaker

Only one call can be active at any given time; all other connected calls must

be placed on hold.

If you want to...

Put a call on hold

Remove a call from hold

Tips

• Engaging the Hold feature typically generates music or a beeping tone. For

this reason, avoid

putting a conference call on hold.

• When you have multiple calls on one line, the active call always appears at

the top of the phone screen. Held calls appear below.

• You can put up to six calls on hold.

Business IP Telephony The Future is

Then...

Press Monitor and then hang up the

handset. You will be able to hear the call

but you will not be able to talk on the call.

Lift the handset or press MonOff.

Press EndCall.

Press the up or down Volume button

when the speaker is in use.

If you want to save the speaker volume

setting, press Save.

Then...

Select the call you want to put on hold and press

the Hold button.

The button turns red and the caller ID information

flashes on the phone screen.

Select the call you want to remove from hold and

press the Hold button. The button light turns off.

Now

Page 9 of 9