Ricoh SP 1200S 빠른 설정 매뉴얼 - 페이지 15
{카테고리_이름} Ricoh SP 1200S에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 1200S 26 페이지. Sp 1200s
2
Loading paper in the paper
tray
1
Pull the paper tray completely out of the
machine.
2
While pressing the green paper-guide release
lever, slide the paper guides to fit the paper
size you are using. Make sure that the guides
are firmly in the slots.
Note
(For USA/Canada and Asia)
For Legal size paper, press the release button in
the bottom of the paper tray and then pull out the
back of the paper tray. (Legal size paper is not
available in some regions.)
Setting Up the Machine
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark (1).
Caution
Make sure the paper guides touch the sides of the
paper so it will feed properly. If you do not this, it
may cause damage to your machine.
5
Put the paper tray firmly back into the machine.
Make sure that it is completely inserted into the
machine.
1
13