Ricoh SP 212SFNw 설정 매뉴얼 - 페이지 20

{카테고리_이름} Ricoh SP 212SFNw에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 212SFNw 25 페이지.
Ricoh SP 212SFNw에 대해서도 마찬가지입니다: 설정 매뉴얼 (25 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지)

페이지 인쇄
Ricoh SP 212SFNw 설정 매뉴얼
Configuring the Machine's IPv4 Address Manually
Press the [User Tools] key.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
Press the [ ] or [ ] key to select [IPv4 Configuration], and then press the [OK] key.
Press the [ ] or [ ] key to select [DHCP], and then press the [OK] key.
Press the [ ] or [ ] key to select [Inactive], and then press the [OK] key.
Press the [ ] or [ ] key to select [IP Address] , and then press the [OK] key.
Enter the machine's IPv4 address using the number keys.
Press the [ ] or [ ] key to move between fields.
Enter the values in all fields, and then press the [OK] key.
Specify the subnet mask and default gateway address as required in accordance with the network environ‑
ment.
Press the [User Tools] key to restart the machine.
The specified setting is applied.
•
For details about configuring the IPv6 address, see the User Guide
•
You cannot configure the network settings while the machine is operating (printing, receiving a fax, etc.).
Correspondingly, the machine cannot receive print jobs and faxes while the network settings are being con‑
figured (after clicking [Network Settings]).
.
20