Ricoh SP 212SFNw 설정 매뉴얼 - 페이지 24
{카테고리_이름} Ricoh SP 212SFNw에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 212SFNw 25 페이지.
Ricoh SP 212SFNw에 대해서도 마찬가지입니다: 설정 매뉴얼 (25 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지)
Configuring the IPv4 Address Settings Using the Smart
Organizing Monitor
On the [Start] menu, click [All Programs].
Click [Smart Organizing Monitor for SP xxx Series].
Click [Smart Organizing Monitor Status].
Click the [User Tools] tab.
Click [IP Address].
Enter the MAC address.
For the MAC address you need to enter, check the items on the configuration page. De-
pending on your connection method, the item you need to check on the configuration page
varies.
For Ethernet connection
Interface Information
For wireless connection
Wireless Status
Enter the IP address you want to change.
The computer's IP address can be ascertained using Command Prompt. To display the IP
address, open Command Prompt, enter "ipconfig", and then press the [Enter] key.
Enter the IP address of the computer being used with the variable part in the IP address
modified.
Specify the subnet mask and default gateway address as required in accordance with the
network environment.
Click [OK].
If the configuration is successful, the message "IP Address has been set well." appears.
If the configuration fails, the message "Setting IP Address failed. Try again." appears. If this
happens, repeat the procedure from Step 6.
Click [OK].
Click [Close].
24
© 2014
EN
CN
M214-8618