Ricoh SP 220SNW 설정 매뉴얼 - 페이지 6

{카테고리_이름} Ricoh SP 220SNW에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 220SNW 16 페이지.

페이지 인쇄

2. Installing the Software

Check how the computer is connected

Specify how to connect to your computer according to the communication environment of your system.

Yes

connect using CD-ROM

Go to page 6 "Easy Setup Using

the CD-ROM".

• To connect using the WPS button, go to page 8 "Easy Setup Using the WPS Button".

• To connect using a PIN code, go to page 9 "Easy Setup Using a PIN Code".

• To set up manually, see User's Guide in the provided CD-ROM or our website (http://www.ricoh.com/printers/sp200/support/gateway/).

• When the Wi-Fi Direct function is enabled, a Wi-Fi Direct compliant device is recognized as a router (access point), and direct

communication among Wi-Fi Direct-compliant devices becomes possible.

When communicating using the Wi-Fi Direct function, you cannot connect to the Internet at the same time.

Use the machine from a smart device

■ How to use the machine from a

smart device

For information about using the machine from a

smart device, see the following website or scan

the following QR code from your smart device.

http://www.ricoh.com/printers/

sp200/support/gateway/

connect by wireless?

use router (access point)?

use computer?

connect using Wi-Fi Setup Wizard

Go to page 7 "Easy Setup Using

the Wi-Fi Setup Wizard".

connect by

USB interface cable

Go to page 5 "Connecting the Machine (USB/Network)".

connect via Wi-Fi Direct

See Wi-Fi Direct Guide in our website

(http://www.ricoh.com/printers/

sp200/support/gateway/).

Android

iOS

connect by wired?

connect by

Ethernet interface cable

■ How to use the NFC tag

(Android smart devices only)

When using Android smart devices, download

and install the RICOH SP 200 series SOM from

the following website or QR code, and then touch

the NFC tag on the machine with the device.

DCH036

DSH075