Ricoh SP 221SNW 설정 매뉴얼 - 페이지 11
{카테고리_이름} Ricoh SP 221SNW에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 221SNW 16 페이지.
페이지 인쇄17. Press the WPS button on the router (access point) within two
minutes.
WPS
• For details about how to use the WPS button, refer to the manuals for
the router (access point).
18. Check the result.
Connection has succeeded:
PBC
Connection to AP
has Succeeded
• Press [EXIT] to return to the screen displayed in Step 15, and
then press the [User Tools] key to return to the initial screen.
Connection has failed:
PBC
Connection to AP
has Failed
• Press [EXIT] to return to the screen displayed in Step 15. Check
the configuration for the router (access point), then try the
connection again.
19. Configuring the Wi-Fi settings is complete.
Easy Setup Using a PIN Code
● Before doing the following procedure, install the printer
driver according to the procedure on page 5
"Connecting the Machine (USB/Network)".
● Make sure the Ethernet cable is not connected to the
machine.
● In Steps 18 to 20, configure each setting within two
minutes.
● To establish a connection using the PIN code, use a
computer that is connected to the router (access point).
● The following item is necessary to set up a wireless
connection.
● Router (access point)
1.
Check that the router (access point) is working correctly.
2.
Open the PIN code configuration window (web page) for the
router (access point) on your computer.
CHV607
EXIT
DSG094
EXIT
DSG095
3.
Press the [User Tools] key.
4.
Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
User Tools
8 9
Tray Paper Settings
Network Settings
Print List/Report
5.
If you are requested to enter a password, enter the password
using the number keys, and then press the [OK] key.
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
6.
Press the [ ] or [ ] key to select [Wi-Fi], and then press the
[OK] key.
Network Settings
2 4
Ethernet
Wi-Fi
IPv4 Configuration
7.
Select [Wi-Fi Enable], and then press the [OK] key.
Wi-Fi
Wi-Fi Enable
8.
Press the [ ] or [ ] key to select [Enable], and then press
the [OK] key.
Wi-Fi Enable
Disable
Enable
9.
Press the [User Tools] key to return to the Initial screen.
10. Wait until the machine restarts.
11. Press the [User Tools] key.
12. Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
User Tools
10 11
Wi-Fi Setup Wizard
Network Settings
Print List/Report
13. If you are requested to enter a password, enter the password
using the number keys, and then press the [OK] key.
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
DSH080
DSH078
DSG084
DSG085
DSG086
DSH080
DSG087
9