Ricoh SP 330SFN 매뉴얼 - 페이지 22
{카테고리_이름} Ricoh SP 330SFN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 330SFN 26 페이지.
페이지 인쇄
- 1. Setup Guide
- 2. Setting up the Machine
- 3. Installing the Software
- 4. Check How the Computer Is Connected
- 5. Use the Machine from a Smart Device
- 6. Connecting the Machine Via Wireless (Wi-Fi)
- 7. Connecting the Machine (Usb/Network)
- 8. Setting the Date and Time
- 9. Selecting the Telephone Line Type and Telephone Network Connection Type
- 10. Setting the Outside Line Access Number
- 11. Basic Operation for Sending a Fax
- 12. Scan Settings
Selecting the Telephone Line Type and Telephone Network Connection Type
1.
Press [Setting].
2.
Press [Administrator Tools].
3.
If you are requested to enter a password, enter the
password using the number keys, and then press [OK].
A password for accessing the [Administrator Tools] menu can
be specified in [Admin. Tools Lock] under [Administrator Tools]
menu.
Setting the Outside Line Access Number
If you have selected PBX, use the following procedure.
1.
Press [Setting].
2.
Press [Administrator Tools].
Basic Operation for Sending a Fax
1.
Press [Fax].
2.
Enter the fax number using the number keys, and then
press [OK].
20
4.
Press [Dial/Push Phone].
5.
Press the telephone line type appropriate for your
telephone service.
6.
Press [PSTN / PBX].
7.
Press [PSTN] or [PBX].
8.
Press the [Home] key to return the initial screen.
3.
If you are requested to enter a password, enter the
password using the number keys, and then press [OK].
A password for accessing the [Administrator Tools] menu can
be specified in [Admin. Tools Lock] under [Administrator Tools]
menu.
4.
Press [PBX Access Number]
5.
Enter the outside line access number using the number
keys, and then press [OK].
6.
Press the [Home] key to return the initial screen.
3.
Press the [Start] key.
Depending on the machine's settings, you may be prompted
to enter the fax number again if you manually entered the fax
number. Enter the fax number within 60 seconds. If the fax
numbers do not match, go back to step 2.
4.
If you place the original on the exposure glass and have
more originals to scan, press [Yes] within 60 seconds,
place the next original on the exposure glass, and then
press [OK].
Repeat this step until all originals are scanned.
5.
When all originals have been scanned, press [No] to start
sending the fax.