Ricoh SP C240 Series 펌웨어 업데이트 매뉴얼 - 페이지 2
{카테고리_이름} Ricoh SP C240 Series에 대한 펌웨어 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP C240 Series 14 페이지.
페이지 인쇄
CAUTION:
•
We recommend that you update the firmware via USB. If you update the firmware over the
network, the machine may receive data over the network such as a print job during the
updates, which can interfere with the update process.
•
If you are updating the firmware via USB, the printer driver for USB connection must be
installed on your computer beforehand. However, if you are updating via a network, no
printer driver is necessary.
•
Make sure your computer is securely connected to the machine with the USB or network
cable that you will be using for the firmware update.
•
Disconnect any other cables that are not necessary for the firmware update, such as a
telephone cable, from the machine.
•
Make sure that your computer does not enter standby or hibernation mode during the
update process. Following is a procedure for configuring this setting based on Windows
XP as an example:
1.
On the
2.
Click
[Performance and Maintenance].
3.
Click
[Power Options].
4.
On the
hibernates:].
Updating the Firmware
Use the following procedure to update the firmware. Be sure to print the
configuration page both before and after the update. Comparing pre- and
post-update configuration pages allows you to check whether or not the
update was successful.
Follow the procedure carefully.
CAUTION:
•
Do not operate the machine using the control panel, access the machine using Web
Image Monitor, perform fax transmissions, printing, or TWAIN scanning during the update
process.
•
The update may take a while to complete. Do not turn off the power during the update. Turn
off the power only when an update completion message appears on the machine's control
panel.
•
Never disconnect the cable you are using for the updates during the update process.
• When using a computer running on a Windows operating system, you must
have an account that has Manage Printers permission. Log on as an Admin-
istrators group member to acquire this permission.
• The screens shown in the following procedure are examples based on Win-
dows XP, unless otherwise stated.
2
[Start] menu, click [Control Panel].
[Power Schemes] tab, select [Never] for [System standby:] and [System