Ricoh SP C250DN 시작하기 매뉴얼 - 페이지 10

{카테고리_이름} Ricoh SP C250DN에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP C250DN 42 페이지. Color laser printers
Ricoh SP C250DN에 대해서도 마찬가지입니다: 사양 (4 페이지), 사용 설명서 (48 페이지)

Ricoh SP C250DN 시작하기 매뉴얼
wirelessly print, for example, from your laptop or tablet, it is recommended that you use the PBC (WPS)
Method outlined below. To use this method, your router must support Wi-Fi Protected Setup, and have a
dedicated WPS button.
Note:
Depending on the Wi-Fi router, the WPS button may have another name. For details, refer to the
wireless router manual.
When using this method, optimum security for the devices is automatically configured, based on the
connection environment. As such, it cannot be assumed that the configured security setting is the most
secure.
If your router does not have a dedicated WPS button, see
Before proceeding, please check the following:
Wireless router is working correctly, i.e., you can wirelessly connect to the Internet from your laptop.
Printer power switch is On.
Network cable is not connected to the printer.

Enable Wi-Fi Settings

Ensure that the printer's Wi-Fi function is enabled, as follows:
1. Press [Menu].
2. Scroll [
] to [Host Interface], and press [OK].
3. Scroll [
] to [Network Settings], and press [OK].
4. Scroll [
] to [Wi-Fi Config.], and press [OK].
5. Select [Wi-Fi], and press [OK].
6. Scroll [
] to [Active], and press [OK].
Note: Alert LED lights.
7. Press [Menu] to exit. Display reads, Please Restart Machine.
8. Turn printer power switch Off. Wait a moment, and then turn On.
.
9. Continue with

Configure IP Address Settings

Choose automatic or manual method for setting the printer's IP address.
Automatic
1. Press [Menu].
2. Scroll [
] to [Host Interface], and press [OK].
3. Scroll [
] to [Network Settings], and press [OK].
4. Scroll [
] to [IPv4 Config.], and press [OK].
5. Select [DHCP], and press [OK].
6. Scroll [
] to [Active], and press [OK].
Note: Alert LED lights.
RICOH SP C250DN/SP C252DN Color Laser Printers
Appendix E: Other Wireless Setup
Getting Started Guide
Methods.
10