Ricoh SP4100N - Aficio SP B/W Laser Printer 브로셔 및 사양 - 페이지 13
{카테고리_이름} Ricoh SP4100N - Aficio SP B/W Laser Printer에 대한 브로셔 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP4100N - Aficio SP B/W Laser Printer 18 페이지. 31 ppm laser printer
Ricoh SP4100N - Aficio SP B/W Laser Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 매뉴얼 (12 페이지)
페이지 인쇄
IMAGe QuALIty
Text
Line art
Halftone range
Halftone fill
Solids
Print density
SP 4100N
Range for
tested units
0
0.5
This report has been reproduced with the written permission of Buyers Laboratory Inc. Any duplication of this report, in whole or part, in any form or manner,
© 2007 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any man-
ner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will be pros-
without the written permission of Buyers Laboratory, is unlawful and violators will be prosecuted. © 2007 Buyers Laboratory Inc. To purchase reprints,
ecuted to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact BLI at (201) 488-0404. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601. Contact us at [email protected].
1.0
1.5
2
contact BLI at (201) 488-0404 (x17) or at [email protected].
Buyers LaBoratory
Send once/print many:
Although there is a collate selection in the driver, it did not
function in testing. For output to be properly collated, the
collate selection must be made from the Windows print screen
within an application; doing so, however, does not increase
file size.
Excellent
Very Good
Fair
Good
Excellent
Black density:
1.35 to 1.37.
Density for units in this class tested to date:
1.00 to 1.94.
Measurements are based on four readings corresponding to four different
solid black locations on the output. The higher the density reading, the
darker the image.
Halftone range:
Grayscale is clearly visible from the 3% to 88% dot-fill levels,
with consistent toner coverage within levels, though not all
transitions between levels were distinct.
Typical halftone range for monochrome laser/LED printers:
3% to 90%.
Ricoh Aficio SP 4100N
Lab TesT RepoRT