Ricoh AF-100 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Ricoh AF-100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh AF-100 11 페이지.

AUTO-FOCUS SHOOTING

* Please be careful not to cover the Distance Measuring Window at the front of the camera accidentally, as this will

cause incorrect focusing.

* Please keep the Distance Measuring Window clean so that focusing is accurate. If it gets dirty, it should be wiped

clean with a soft cloth.

* There may be rare cases where the subject cannot be well focused. (For instance, dark subjects that do not reflect the

light well, glossy subjects, or subjects taken through glass.) In these cases it is best to use the pre-focus to "look" the

focus on a "normal" subject at the same distance. While holding focus, turn the camera to the original subject and

shoot.

(CLICK HERE TO SEE FIG. 17 - 19)

1. Set the subject you wish to take within the Auto-Focus Frame in the center of the

viewfinder. (Fig. 17)

2. When you press the Shutter Release Button halfway, the Auto-Focus Monitor will light up

to indicate the subject is focused. If the Auto-Focus Monitor blinks, you should move back a

little as the camera is too close to the subject. (Fig. 18) . _

3. If the Auto-Focus Monitor glows steadily, gently press the Shutter Release Burton down

to take the picture. The film will advance automatically as soon as the shutter has been

released Fig. 19) .

4www.butkus.org