Ricoh gr digital III 사용자 설명서 - 페이지 2

{카테고리_이름} Ricoh gr digital III에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh gr digital III 2 페이지. Firmware update
Ricoh gr digital III에 대해서도 마찬가지입니다: 사용 설명서 (5 페이지)

페이지 인쇄
Ricoh gr digital III 사용자 설명서
3
Menu Page Advance
9
8
Use
and
to page through the shooting (page 54), setup
(page 112), and "Edit My Settings" (page 117) menus.
4
Snap Focus Distance
A 1.5 m option has been added to the Snap Focus Distance
menu (page 64). Select this option to set the snap focus
distance to 1.5 m (4.9 ft.).
5
ADJ. Direct ISO Control
An ADJ. Direct ISO Control option has
been added to the setup menu (page
112). If On is selected, ISO sensitivity
(page 84) can be adjusted by pressing
the ADJ. lever left or right when the
camera is in shooting mode. The
default setting is Off.
Caution
The ADJ. lever can be used to adjust sensitivity while the shutter button
is pressed halfway in program shift and aperture priority modes (in
program shift mode, sensitivity can be adjusted even after the shutter
button is released, as long as shutter speed and aperture are displayed).
Note that once sensitivity has been adjusted in this manner, Auto and
Auto-Hi can not be re-selected.
9
8
6
The GF-1 Flash Unit
The camera now supports the Ricoh flash interface and offers
TTL-auto flash control with optional GF-1 flash units. See the
GF-1 manual or "The GF-1 Flash Unit" on page 167 of the GR
DIGITAL III Camera User Guide for more information.
To choose a flash mode, press
(manual flash mode is not available).
Manual flash mode must be selected
with controls on the GF-1, but the flash
amount can be selected using the
Manual Flash Amount option (page 73)
in the camera shooting menu (page 54).
7
Other Changes
Optional flash units will not fire during interval shooting
(page 75). Use the built-in flash.
F