Ricoh PENTAX WG-10 빠른 매뉴얼 - 페이지 9

{카테고리_이름} Ricoh PENTAX WG-10에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh PENTAX WG-10 31 페이지.

Others

• The SD Memory Card is equipped with a

write-protect switch. Setting the switch to

LOCK prevents new data from being

recorded on the card, the stored data

from being deleted, and the card from

being formatted by the camera or

computer.

r appears on the display when the card

is write-protected.

• Care should be taken when removing the SD Memory Card immediately

after using the camera, as the card may be hot.

• Keep the battery/card cover closed and do not remove the SD Memory

Card or turn the camera off while the data is being played back or saved

to the card, or the camera is connected to a computer with the USB cable,

as this may cause the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it

away from water and store away from high temperature.

• Do not remove the SD Memory Card during formatting as this may damage

the card and render it unusable.

• The data on the SD Memory Card may be lost in the following

circumstances. We do not accept any liability for data that is deleted

(1) when the SD Memory Card is mishandled by the user.

(2) when the SD Memory Card is exposed to static electricity or electrical

interference.

(3) when the SD Memory Card has not been used for a long time.

(4) when the SD Memory Card is ejected or the batteries are removed

while the card is being accessed.

• If it is not used for a long time, the data on the card may become

unreadable. Be sure to regularly make a backup of important data on a

computer.

• Be sure to format SD Memory Cards that are unused or have been used on

another camera.

• Please note that deleting data, or formatting the SD Memory Cards or the

built-in memory does not completely erase the original data. Deleted files

can sometimes be recovered using commercially available software. It is

user's responsibility to ensure the privacy of such data.

Write-protect

switch