Ricoh R03010 무선 통신 매뉴얼 - 페이지 5

{카테고리_이름} Ricoh R03010에 대한 무선 통신 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh R03010 12 페이지.

Setting from the Menu

Select [Wireless LAN Setting] in the D4 menu,

and press D.

The [Wireless LAN Setting] screen appears.

Set [Action Mode] to [On].

Set [Action Mode] to [Off] to

disable the wireless LAN

function.

Press F twice.

t Memo

• In Step 2, select [Communication Info.] to check [SSID],

[Password], and [MAC Address] of the wireless LAN. Or,

press M to reset the settings to their default values.

Turning the Camera on While Pressing the

Playback Button

The wireless LAN function can be enabled in the playback mode

from the power-off state of the camera.

With the camera turned off, turn the main switch

to [ON] while pressing 3.

Keep pressing 3 for about 2 seconds.

The camera is turned on in the playback mode and the

wireless LAN function is enabled.

Wireless LAN Setting

Action Mode

Communication Info.

Using the Fx Button

If you register the wireless LAN function to the customizable

function button (Fx button) in advance, you can enable and

disable the function by a simple button operation.

button following the procedures described in

the Operating Manual.

Press the button with [Wireless LAN Setting]

registered.

The wireless LAN function is enabled or disabled.