Ricoh R10 펌웨어 업데이트 지침 - 페이지 4

{카테고리_이름} Ricoh R10에 대한 펌웨어 업데이트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh R10 5 페이지. Lcd color balance adjustment file rewriting instruction manual
Ricoh R10에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지), 컬러 관리 매뉴얼 (5 페이지)

페이지 인쇄
Ricoh R10 펌웨어 업데이트 지침
10.

For Windows

When the copying of the firmware is completed, double-click the [Safely
Remove Hardware] icon in the task bar.

For Macintosh

Drag and drop the [RICOHDCX] icon to the [Trash] icon. Once the icon
has disappeared, proceed to Step 14.
Caution
If you skip the procedures in Step 10, the firmware copy may not be successful.
11.
Select [USB Mass Storage Device], and click [Stop].
12.
Click [OK].
13.
Click the [Close] button.
14.
Turn the camera off, and disconnect the USB cable.
To copy the firmware using a card reader or a card writer to an SD memory
card
1.
Load the SD memory card into the camera, and turn the power on.
2.
Display the camera's Setup menu, select [Format [Card]], and press the
ADJ./OK button $.
3.
Select [Yes], and press the ADJ./OK button.
• The SD memory card is formatted.
Caution
If you format a card that still has images stored on it, the images will be lost. Save the images you do not want to erase in
your computer before formatting the card.
4.
Turn the camera off, and remove the SD memory card.
5.
Copy the files [elaunch3], [elaunch4], [elaunch8] (created when the
firmware was extracted) into the root directory of the SD memory card.
6.
Load the camera with the SD memory card which the firmware was copied
to.
4