Ricoh THETA 구성 매뉴얼 - 페이지 3

{카테고리_이름} Ricoh THETA에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh THETA 7 페이지. Configure cameras for scanplan
Ricoh THETA에 대해서도 마찬가지입니다: 시작하기 (9 페이지)

Connecting to the Theta Wi-fi

1. Remove the USB connector from the Theta camera (the Wi-Fi can't be enabled while it's connected).

2. Turn on the Theta camera by briefly pressing the power button on the side.

3. LED's will illuminate and the Wi-Fi icon above the camera icon will be flashing.

4. If the Wi-Fi icon is not flashing, press the 2nd button.

5. The Theta serial number is the default Wi-Fi password. (just the numbers NOT the "YL").

Note: It is not advised to change the password as there is no password recovery feature.

6. The Theta camera will be visible in the list of available Wi-Fi sources as THETAYLXXXXXXXX.OSC. The X's will

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT