Ricoh A077-19 기술 게시판 - 페이지 13

{카테고리_이름} Ricoh A077-19에 대한 기술 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh A077-19 38 페이지.

SUBJECT: Service Manual Correction

Incorrect

Correct

4. Service Manual Page 4–14 (SP111) ... A076 copier only

Please add the following explanation to page 4–14 of the service manual.

This explanation is how to use the SP111 (Number of Misfeeds by Location) for A076

copier.

1. Enter the SP mode by turning on the Dip SW101–2 on the main board.

NOTE:

For A076 copier, you cannot access the SP111 if you enter the SP mode by

key operation.

2. Access to SP111.

3. Press and hold the Interrupt key.

4. Select the desired number ("1" or "2", "1" ... Paper Feed, "2" ... Exit) by the Quantity

Increase (+) or Decrease (–) key while holding the Interrupt key, and then release

the Interrupt key.

5. Press the ADS key ("111" will blink) and then press the ADS key again.

6. The first two digits for the number of misfeeds are displayed in the copy counter.

Press the Lighter key once to display the next two digits and press the Lighter key

one more time to display the last two digits (six digits in total).

Technical Bulletin

Reissued on: August 31, '92

No. RTB-005

DATE: July 15, '92

PAGE: 4 of 4