Ricoh A110 서비스 매뉴얼 - 페이지 34

{카테고리_이름} Ricoh A110에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh A110 46 페이지.

31 March 1994

6. Place new strip of 2 sided tape [F] on the lower casing surface as shown

in the illustration.

The side edge [G] of the tape must be flush with the edge [H] of the lower

casing and the lower edge [I] of the tape must be flush with the edge [J]

of the projection of the lower casing as shown in the illustration.

7. Place new strips of 2 sided seals [K] on the side seals [E] of both sides.

8. Place the new entrance seal [L] on the 2 sided tape [F] and the 2 sided

seals [K] as shown in the illustration.

NOTE: a) Lower edge [M] of the entrance seal must be aligned with the

edge [J] of the projection of the lower casing.

b) Make sure that there are no waves in the upper edge [N] of the

entrance seal.

REPLACEMENT AND ADJUSTMENT