Cisco UNIFIED COMMUNICATIONS UC320W 설치 전 사이트 정보 - 페이지 9
{카테고리_이름} Cisco UNIFIED COMMUNICATIONS UC320W에 대한 설치 전 사이트 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UNIFIED COMMUNICATIONS UC320W 29 페이지.
Cisco UNIFIED COMMUNICATIONS UC320W에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄
Telephony Settings
System Settings
System Mode:
For Your Information:
-
Key System: Users can directly access analog phone lines through line buttons on the phone. All users can monitor all
calls on all lines. If a call is placed on hold by one user, it can be resumed by any other user. When a user presses a line
button, the line is immediately seized for an outbound call; no access code is required (no need to dial 9, for example).
SIP/BRI trunks cannot be configured.
-
PBX: Users have no direct access to phone lines; external calls require an access code such as 9. There are no shared
FXO (analog) lines (as described for Key System). Both FXO (analog) trunks and SIP/BRI trunks can be used.
-
Blend: The system functions as a PBX system, as described above, but allows shared FXO (analog) lines, as in a Key
System. Outbound calls require a steering digit except when a shared FXO line (analog phone line) is selected by
pressing a line button on a phone. FXO (analog) lines and SIP/BRI Trunks may be used.
Choose one:
Key System
Call Scheduling:
•
Auto Attendant: Choose one.
Choose one.
Single AA menu for all hours
•
Call Routing:
Choose one.
Same behavior for all hours
•
Schedule: If you chose the open/closed (day/night) option for any of the above features, indicate the schedule below.
Choose one.
Operating Hours
Note the operating hours for each day of the week.
(Example: Mon.-Fri.: 8-12, 1-6. Sat.: 11-5.
Sun.: Closed.)
The following system modes are available:
Blend
Turn On
Manually trigger open/closed (day/night) behavior through Force Night button on phone
Use automated schedule (specify below)
PBX
Turn Off
Different menus when office is open/closed (day/night)
Allow different options for open/closed hours (day/night)
Holiday Date
Enter dates when
business is closed.
Pre-Installation Workbook
Holiday Description
Enter a short description.
Also note if the holiday occurs
yearly on the same date.
9