Ricoh Aficio MP C3002 빠른 시작 매뉴얼 - 페이지 21
{카테고리_이름} Ricoh Aficio MP C3002에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio MP C3002 24 페이지. Papercut ricoh embedded manual
Ricoh Aficio MP C3002에 대해서도 마찬가지입니다: 사용자 설명서 (41 페이지), 브로셔 및 사양 (8 페이지)
![Ricoh Aficio MP C3002 빠른 시작 매뉴얼](/uploads/products/server2/5375418/5375418.jpg)
The Bypass Tray can be used for paper that isn't normally loaded in the paper trays, or for paper that is too heavy to pass
through the paper trays. It can also be used for odd-sized paper, one-time use paper, overhead transparencies, or enve-
lopes. The paper size and type should be defined before use.
Open the bypass tray from the side of the
MFP.
1. The paper size in the Bypass Tray is displayed.
3. Select your paper size, or select [Custom Size] to manually
define a non-standard size. Then, select [OK].
Using the Bypass Tray
Insert paper face down until you hear a beep,
and adjust the guides tightly to the paper. If
the guides are not flush to the paper, mis-
feeds or skewed images might occur.
2. Once you insert paper into the Bypass Tray, you will see
the Bypass Tray Paper screen. To define the paper size,
select [Paper Size]. Later, you will define [Paper Type].
4. Select [Paper Type], and then select the type of paper
inserted into the Bypass Tray. Then, select [OK].
Page 21