Cisco Unified IP Phone Expansion Module 7915 매뉴얼 - 페이지 21
{카테고리_이름} Cisco Unified IP Phone Expansion Module 7915에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Unified IP Phone Expansion Module 7915 27 페이지. Unified ip phone and expansion module for unified communications manager express 4.3 and later versions
Cisco Unified IP Phone Expansion Module 7915에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지)
6
Technical Specifications for the
Cisco Unified IP Phone Expansion
Module 7915
This section provides the physical and operating environment
specifications for the Cisco Unified IP Phone Expansion
Module 7915, as well as the regulatory compliance information.
Physical and Operating Environment
Specifications
Specification
Operating Temperature
Operating relative humidity
Storage temperature
Height
Width
Depth
Weight
Power
Cable Specifications
The following are the cable specifications for the cables used
with the Cisco Unified IP Phone Expansion Module 7915:
• 2 RJ-11 jacks with 6-pin connectors for the interface cable
connections
• 48-V power connector. The diameter of the center pin in the
Expansion Module power jack (Switchcraft 712A) is 0.1 in.
(2.5 mm). The center pin is positive (+) voltage. The
miniature power plug required to mate with the power jack
on the Expansion Module is a Switchcraft 760 or
equivalent.
Value or Range
32 to 104°F (0 to 40°C)
10 to 95% (noncondensing)
14 to 140°F (-10 to 60°C )
203 mm, 8.0 in.
121 mm, 4.75 in.
51 mm, 2.0 in.
366 g, 0.82 lb.
48 VDC, 40mA max
21