Ricoh MP C6003 관리자 매뉴얼 - 페이지 35

{카테고리_이름} Ricoh MP C6003에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh MP C6003 48 페이지. Envelope printing, setup & printing
Ricoh MP C6003에 대해서도 마찬가지입니다: 브로셔 및 사양 (12 페이지), 사용자 설명서 (36 페이지), 기능 설정 매뉴얼 (5 페이지), 매뉴얼 (44 페이지), 훈련 연습 (4 페이지)

Ricoh MP C6003 관리자 매뉴얼

Changing MFP Settings During Operation

Of the settings specified before operation according to the procedure described on page 12
"Specifying the MFP Settings", the following setting can be changed even during operation.
1. Changing [System Settings] Using the Control Panel
Tab
Timer Settings
Interface Settings
Interface Settings
Interface Settings
Administrator Tools
Item
Auto Logout Timer
Network
Machine IPv4 Address
Network
IPv4 Gateway Address
Network
DNS Configuration
Program / Change
Administrator
Administrator 1-4
Changing MFP Settings During Operation
Settings
Select [On], and then set the range for
the timer between 60-999 seconds.
• Specifying a static IPv4 address
Enter the IPv4 address and subnet
mask.
• Obtaining the DHCP server
address automatically
Select [Auto-Obtain (DHCP)].
Enter the IPv4 gateway address.
Specify this only if you are using a
static DNS server.
• Specifying a static DNS server
Enter the IPv4 address in "DNS
Server 1", "DNS Server 2", and
"DNS Server 3". (Specify DNS
Server 2 and 3 if required.)
• Obtaining the DHCP server
address automatically
Select [Auto-Obtain (DHCP)].
Specify settings for one or more
administrators.
Specify the administrator's "Login User
Name" and "Login Password".
Assign all administrator roles (user
administrator, machine administrator,
network administrator, and file
administrator) to a single administrator.
33