Ricoh MPC 1500sp 문제 해결 매뉴얼 - 페이지 3

{카테고리_이름} Ricoh MPC 1500sp에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh MPC 1500sp 15 페이지.

Sometimes you will have to perform head cleaning more than once to

resolve the issue. If after 4 head cleans, you still have a problem, then try

head flushing. If after this, there is still an issue, then try physically cleaning

the heads.

ONLY USE SPECIALISED HEAD CLEANING CLOTHS

PART NUMBER B2299311

If this is happening regularly there are a few options you can try depending

on when the lines appear.

1. If the symptom occurs when a printout is made after leaving the

machine unused for a long time, make sure the Engine Firmware is

v1.10 or later. This will ensure the head home position is correct, thus

ensuring the heads are capped correctly on the maintenance unit.

2. Make sure the carriage slide is in the correct position. If it is not then,

as previously the heads will not cap correctly, thus drying out. Use

the following guide to check and adjust.

Release the lock for the maintenance unit. To do this turn the adjuster clockwise until the

heads of the triangles line up.

Slide the carriage until the small white part in the photo lines up with the hole.

Correct position

Incorrect position