Ricoh 3800C Series 설치 매뉴얼 - 페이지 2

{카테고리_이름} Ricoh 3800C Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh 3800C Series 2 페이지. Paper feed unit, 500 x 1, for machine code: g060/g080/g082
Ricoh 3800C Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (4 페이지), 유지 관리 매뉴얼 (7 페이지), 설치 매뉴얼 (2 페이지)

페이지 인쇄

Take out the packaged items, making sure there are two

thumb screws and one mounting bracket. Close the tray of

the 1000-sheet paper feed unit firmly.

Slowly pull out Tray 2 while lifting up a little.

Fasten one thumb screw. A coin can be used to fasten the

screws.

Slowly slide Tray 2 back into the printer, until it stops.

Open the right cover of the 1000-sheet paper feed unit.

ZDJP005J

ZHXH853J

ZDJP015J

ZHXH050N

Printed in Japan

Hook the mounting bracket to the hole, as shown.

Fasten the bracket with the other thumb screw. A coin can

be used to fasten the screws.

Close the right cover of the 1000-sheet paper feed unit.

Stick labels "3" and "4" above the handles on the front of

the 1000-sheet paper feed unit.

Note

After finishing the installation, you can check the 1000-sheet

paper feed unit is installed properly: Print the configuration

page from the "List/Test Print" menu. If it is installed properly,

you will see "Paper Feed Unit (Tray 3 & Tray 4)" appear under

the "Options" list. (G060, G080)

After finishing the installation, you can check the 1000-sheet

paper feed unit is installed properly: Print the configuration

page from the "Print Menu" menu. If it is installed properly, you

will see "Tray 3" and "Tray 4" appear under the "Paper Tray

Information" list. (G082)

If the paper feed unit is not installed properly, repeat the

procedure from step

. If you cannot install it properly even

after reinstallation, contact your sales or service representative.

ZHXH060N

ZDJP018J

ZDJP127J

G568-8600B