Ricoh Aficio AP400N 보충 설명서 - 페이지 14

{카테고리_이름} Ricoh Aficio AP400N에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio AP400N 38 페이지. Sap printing
Ricoh Aficio AP400N에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 매뉴얼 (12 페이지)

페이지 인쇄

1. Assigning the Ip Address

UNIX Configuration

After Executing Installation Shell Script

The printing environment is set up automatically when the installation shell

script is executed.

This section describes the set up contents when the installation shell script is ex-

ecuted under Red Hat Linux, Solaris and HP-UX.

Linux

❖ ❖ ❖ ❖ Adding the IP address and host name to the /etc/hosts file

The following line is added to the /etc/hosts file. The IP address and printer

host name which you previously entered in the installation script will be

used.

192.168.15.16 nphost # Network Printer

• 192.168.15.16 is the IP address, nphost is the host name, from # to the end

of the line is a comment.

Note

❒ The /etc/hosts file contains a list of the IP addresses and host names of all

of the hosts communicating on the network. Each entry is delimited with

a space or a tab, and each line is separated with a return.

❒ If you do not use NIS or DNS, you must manually enter the IP address and

host name of each workstation using the network printer in the /etc/hosts

file.

❖ ❖ ❖ ❖ Adding an entry to the /etc/printcap file

The following entry is added to the /etc/printcap file, which is the configu-

ration for printing with the lpr command. In order to use the lpr command to

print, you need to edit the /etc/hosts file, add an entry for the network print-

er to the /etc/printcap file and create a spool directory.

##PRINTTOOL3## REMOTE

np|Network Printer:\

:rm=nphost:\

:rp=option:\

:sd=/var/spool/lpd/npd:\

:lf=/var/log/npd-errs:\

:sh:\

:mx#0:

Note

❒ The /etc/printcap file is used to register the name and attributes of a print-

er. You must make an entry for the network printer in the /etc/printcap

file of all workstations using the network printer.

❒ You must make an entry for each printer option when using the same

printer.