Ricoh Aficio AP4510 보충 설명서 - 페이지 13

{카테고리_이름} Ricoh Aficio AP4510에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio AP4510 38 페이지. Sap printing
Ricoh Aficio AP4510에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지), 교체 매뉴얼 (2 페이지), 설치 절차 (2 페이지), 설치 매뉴얼 (4 페이지), 매뉴얼 (12 페이지), 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

Solaris

❖ ❖ ❖ ❖ Adding the IP address and host name to the /etc/hosts file

The following line is added to the /etc/hosts file. The IP address and printer

host name which you previously entered in the installation script will be

used.

192.168.15.16 nphost # Network Printer

• 192.168.15.16 is the IP address, nphost is the host name, from # to the end

of the line is a comment.

Note

❒ The /etc/hosts file contains a list of the IP addresses and their host names

of all of the hosts communicating on the network. Each entry is delimited

with a space or a tab, and each line is separated with a return.

❒ If you do not use NIS or DNS, you must manually enter the IP address and

host name of each workstation using the network printer in the /etc/hosts

file.

❖ ❖ ❖ ❖ Registering the printer

The installation shell script registers the printer as a remote printer.

If your workstation is Solaris 2.5.1, register the print server and print client

to the print service.

# lpsystem -t bsd -R 0 -y " " " " Network Printer" " " " nphost

# lpadmin -p np -s nphost!"option" -T dump -I any

• np is the printer name, nphost is the host name. For more information

about "option", see p.16 "Specifying the Device Option".

"lp" will be assigned, if the option is not used.

When printing with the lp command, use ( _ ) instead of ( = ) and ( ; )

instead of ( , ) for operating systems that cannot use ( = ) and ( , ) such as

Solaris 2.5 or later.

If your workstation is Solaris 2.5.1, set the print job to active so that it can