Ricoh Aficio AP4510 보충 설명서 - 페이지 6

{카테고리_이름} Ricoh Aficio AP4510에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio AP4510 38 페이지. Sap printing
Ricoh Aficio AP4510에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지), 교체 매뉴얼 (2 페이지), 설치 절차 (2 페이지), 설치 매뉴얼 (4 페이지), 매뉴얼 (12 페이지), 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

UNIX Configuration

Using the Installation Shell Script

The installation shell script helps with the setup process. The installation shell

script automates some of the tasks in configuring /etc/hosts, /etc/printcap, and

in creating the spool directory for BSD UNIX, and in running the lpadmin com-

mand for System V UNIX.

Preparation

The installation shell script can be used on the following three kinds of work-

stations. This installation shell script cannot be used with other types of work-

stations.

• Solaris 2.5.1, 2.6, 7, 8

• HP-UX 8.x, 9.x, 10.x, 11.0

• Red Hat Linux 6.x, 7

When you use NIS (Network Information Service) or DNS, you should con-

figure the server before running this installation shell script.

For more information about the configuration utility of your OS, see the man-

ual that came with the utility.

Assigning the IP Address

Preparation

Configure the machine to use the TCP/IP protocol.

• Make sure that the TCP/IP protocol on the machine is set to active. (The

default is active.)

• Assign an IP address to the machine and configure the other settings re-

quired for using the TCP/IP protocol.

Reference

For more information about how to make the above settings, see the Printer

Reference.

Checking the IP address configuration

Follow the procedure below to make sure that the IP address has been config-

ured correctly.

• The following procedure uses the sample IP address: 192.168.15.16.

A A A A

Enter the following:

# ping 192.168.15.16

If the address has been configured correctly, the following message appears.

192.168.15.16 is alive

If the address has been configured incorrectly, the following message appears.

no answer from 192.168.15.16