Ricoh CF5010 서비스 매뉴얼 - 페이지 13

{카테고리_이름} Ricoh CF5010에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh CF5010 35 페이지. Cover feeder

X03258 CF5010e Service manual

3.2.6 DRIVE MOTOR M16 ASSEMBLY

[B]

Removal

Remove complete Cover Feeder unit (

2. Disconnect Connector [A] (

3. Remove Drive motor M16 assembly by removing screws [B] (

NOTE: Be careful when removing the Drive motor M16 assembly, so that the

Drive Shaft Assembly will not damage the LED sensor CF-Q30 (

3.1.2).

4. Loosen the allen screw [C] to Drive clutch assembly (

5. Remove the motor bracket by removing screws [D] (

Replacement

Reverse the removal procedure.

Enter Service mode (

Perform Cover Feeder motor calibration (

al).

Adjustment

Adjust the Drive clutch assembly, so that there is play between the coupling on the

Drive shaft and the Clutch. The play should be 0.4 ± 0.3 mm. Adjust by loosening

screw [C].

[A]

1.1.1).

x1).

5.1.1 in BK5010e Service Manual).

0.4 ± 0.3 mm play between

the coupling and the clutch

CF-3-9

[C]

x2).

x1).

x3).

5.5 in BK5010e Service Manu-

15 Jan 2013

[D]

[C]