Ricoh Container Stacker 포장 풀기 및 설정 지침 - 페이지 17

{카테고리_이름} Ricoh Container Stacker에 대한 포장 풀기 및 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Container Stacker 49 페이지.

3. Turn the four leveling bolts until the casters no longer touch the floor.

4. Using a Level, adust the horizontal level of the rear engine.

Install Container Stacker 1 or 2

NOTE

These installation instructions apply to the 70, 92 and 184 ppm

printers.When installing a Container Stacker on a 184 ppm printer, the

word printer always refers to the Rear Engine unless otherwise specified.

1. Remove the two M3x8 screws and Static Electricity eliminator from the Printer.

2. Install the Guide Plate (U) with the Static Electricity eliminator using the two

M3x8 screws.(the front is lettered on the surface).

NOTE

Take care that nothing interferes with the static eliminator.

3. Install the Guide Plate (L) using the two M3x8 screws with washers.

4. Install Joint Bracket (U) and Joint Bracket (L) using the two M4x8 screws.

1-12

Container Stacker Installation Instructions

Level

Rear Engine

Leveling Bolt

Caster

Floor

Gap

(Max 1mm)