Ricoh G056 기술 게시판 - 페이지 6
{카테고리_이름} Ricoh G056에 대한 기술 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh G056 46 페이지. Envelope feeder
Ricoh G056에 대해서도 마찬가지입니다: 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (1 페이지)
페이지 인쇄
Model:
Model K-P1
CAUSE
Dirty background on the right side:
The developer will shift to the left side if the cartridge is tilted as shown below when the
sealing tapes are being removed. This causes toner to be over-supplied on the right side
of the cartridge, which in turn causes the dirty background on the right side of the printout.
Developer accumulates on
left side of the cartridge.
Dirty background throughout the page:
This may occur when the user turns on the main switch without removing the tape seals or
when the cartridge has been shaken after the seals are removed.
The position of the toner agitator is adjusted at the factory. When the main switch is turned
on, the main motor turns the agitator. Then, when the user actually removes the seals and
resets the cartridge in the machine, the agitator is no longer in the proper position, and this
causes dirty background on the printouts.
If the cartridge is shaken after the tape seals are removed, dirty background may occur as
the developer is not evenly distributed in the development unit.
T
B
echnical
When removing the tape, place the
machine on a level surface.
ulletin
Date:
09-Apr-01
1
2
3
4
PAGE: 2/3
No.:
RG058003