Ricoh MP CW2201sp 매뉴얼 - 페이지 19
{카테고리_이름} Ricoh MP CW2201sp에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh MP CW2201sp 29 페이지. Cip training copy
Ricoh MP CW2201sp에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지)
페이지 인쇄
CIP Training
Copy
Copying from the Paper Bypass Location
Use the paper bypass location to copy onto paper sizes that cannot be loaded on the paper input
locations.
About how to load paper in the paper bypass location, see page 152 "Loading Paper into the Paper
Bypass Location".
If cables are hanging from the back of the machine or objects are near the back of the machine, paper
may bump against them and cause a paper jam or wrinkle the paper. Check that there are no objects on
the back of the machine before you start copying.
When Using the Copy Application
About how to use the application's screen, see page 43 "[Copy] Screen".
When Using the Copier (Classic) Application
1.
Open the front cover, and then pull up the paper holding lever.
2.
Insert the paper copy side up into the paper bypass location.
3.
Lower the paper holding lever, and then close the front cover.
4.
Specify the type of the paper as necessary.
5.
Make sure that the paper bypass location (
6.
Press [Paper Size].
7.
Specify the size of the paper, and the press [OK] twice.
8.
Enter the number of copies with the number keys.
9.
Place the original, and start scanning.
Copying starts automatically.
10.
When copying the originals onto two or more sheets of paper, repeat Steps 1 to 4 for
as many copies as you are making.
In Step 4, select [Matches].
11.
When the copy job is finished, press [Reset] to clear the settings.
MP CW2201SP
Copying from the Paper Bypass Location
) is selected, and then press [ ].
81