Ricoh PE-MF2b 서비스 교육 - 페이지 12

{카테고리_이름} Ricoh PE-MF2b에 대한 서비스 교육을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh PE-MF2b 23 페이지.

Main Specifications - 2/2

Memory (RAM)

128 MB (Main board: PE-MF2b & PE-MF2c)

PE-MF2c also has 128MB on its PDL board

(built-in), with an empty slot which can be

upgraded with an optional 256MB board, for a

maximum of 384MB on the PDL board (in

addition to the main board's 128MB)

» Note: As the memory for the main board and the

memory for the PDL board serve different functions, the

128MB of the Main Board and the maximum of 384MB

on the PDL board should not be thought of as additive

for a total of 512MB.

Slide 12

Memory

PE-MF2b (GDI model): The memory on the main board is used for

printing.

PE-MF2c (PDL/PS model): The memory on the PDL board is used for

printing. Raster data in the memory on the PDL board is sent to the

memory on the main board. However, the memory on the main board is

not used for printing processing; it is only a temporary holding area. So

the 128 MB on the main board cannot be included in the total printer

memory spec.

Print Resolution settings: There are three settings (600 x 600 1-bit, 600 x 600

2-bit [also called 1200 x 600], 600 x 600 4-bit [also called 2400 x 600 dpi])

Without 256 MB of extra memory, 2400 x 600 dpi duplex LG size cannot

be printed (PCL/PS). For PostScript printing, 2400 x 600 dpi Duplex

also cannot be printed for A4/LT or A5.

Other specs

Maximum paper size for scanning

Exposure glass: A4, Letter (8.5×11")

ADF: Legal (8.5×14")

Maximum paper size for printing: Legal (8.5×14")

ADF capacity: 35 sheets

Scan area (scanner mode)

Exposure glass: 216 x 297 mm (8.5 x 11.7 inches)

ADF: 216 x 356 mm (8.5 x 14.1 inches)

M018/M019

PE-MF2b/PE-MF2c