Ricoh S7 D3DS 현장 서비스 매뉴얼 - 페이지 17

{카테고리_이름} Ricoh S7 D3DS에 대한 현장 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh S7 D3DS 23 페이지. Double-feed kit

guide onto the feed cover.

Snap the edge of the guide onto the posts, and then fasten the guide with the screws.

At the left rear corner of the ADF, push the harnesses into the cutout.

At the front, pull the hinge arm [A] out slightly.

Set the lower guide [B].

Make sure that three holes [C] across the top are aligned with the frame below.

•

If the holes are not perfectly aligned, or if the guide is "floating" above the holes, make sure the

1.Install