Ricoh PJ WX5150 사용자 설명서 - 페이지 11

{카테고리_이름} Ricoh PJ WX5150에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh PJ WX5150 18 페이지.
Ricoh PJ WX5150에 대해서도 마찬가지입니다: 사양 (4 페이지)

An alert mail is sent when a cooling fan is stopped.

The body of the mail is "Fan Lock:xxx.xxx.xxx.xxx*"

Over Temperature

An alert mail is sent when internal temperature is too high.

The body of the mail is "Over Temperture:xxx.xxx.xxx.xxx*"

Lamp Hours Running Out

An alert mail is sent when lamp life is ending.

The body of the mail is "Lamp Hours Running out:xxx.xxx.xxx.xxx*"

Lamp Fail

An alert mail is sent when the projector fail to light the lamp.

The body of the mail is "Lamp Fail:xxx.xxx.xxx.xxx*"

* "xxx.xxx.xxx.xxx" means IP address of the projector. (ex. 192.168.0.100)

-Email test

Test Email is sent when click [Email Test].

Since no error will be reported even if any error is occurred in sending a test mail.

Check if the test mail is arrived to destination mail box.

The body of the mail is "Email Test:xxx.xxx.xxx.xxx"

"xxx.xxx.xxx.xxx" means IP address of the projector. (ex. 192.168.0.100)

<Note>

-Be sure Email settings and SMTP settings are correct.

-Email test is recommended after alert setting is set.

-Always set "Control method" to "LAN" in OSD menu in the projector to detect the error.

-Default value of Email setting is a sample setting as followings.

[Subject] Project alert

-Only SMTP protocol is supported.