Epson ELPFP15 설치 매뉴얼 - 페이지 22
{카테고리_이름} Epson ELPFP15에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ELPFP15 24 페이지.
페이지 인쇄Installation Method
ELPMB67
• We recommend installing the anchor bolts on the ceiling within 1 meter from the center of this product.
• If you are only using the ELPMB67, install the 2 wires diagonally.
• If you are using the ELPMB67 in combination with the ELPFP15, install the 4 wires.
Installing
a
Secure the end of the safety wire (the end with a loop) to the ceiling using a commercially
available anchor bolt (M12)
Hold the wire with the flat washer and the spring washer, and tighten the hexagon nut to secure it in
place.
Make sure that the loop on the safety wire does not protrude beyond the flat washer.
Caution
Make sure that the loop on the safety wire is not bent at a sharp angle. This could cause damage to
the wire.
a:
Anchor bolt
b:
Safety wire
c:
Flat washer (diameter 24 to 26 mm)
Spring washer
d:
e:
Hexagon nut
21
ELPMB67+ELPFP15