Ricoh FAX 1190L 소프트웨어 사용 설명서 - 페이지 4

{카테고리_이름} Ricoh FAX 1190L에 대한 소프트웨어 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh FAX 1190L 30 페이지. Software user's guide
Ricoh FAX 1190L에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 설정 매뉴얼 (19 페이지)

페이지 인쇄

Using the machine as a printer

Printing from the manual feed slot

Note

The machine automatically turns on the Manual Feed mode when you put paper in the manual feed slot.

Set the Paper Size, Media Type, Paper Source, and other settings in the printer driver.

Set the Paper Source to Manual.

Slide the paper guides to fit the paper size.

Using both hands put paper in the manual feed slot until the

front edge of the paper touches the paper feed roller. Hold the

paper in this position until the printer automatically feeds it in for

a short distance, and then let go of it.

Send the print data to the machine.

Note

■

Put the paper into the manual feed slot with the side to be printed face up.

■

Make sure that the paper is straight and in the proper position on the manual feed slot. If it is not, the paper

may not be fed properly, resulting in a skewed printout or a paper jam.

■

Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam.

After the printed page comes out of the machine, put in the next sheet of paper as in Step 3 above.

Repeat for each page that you want to print.

Manual Duplex Printing

The machine prints all the even-numbered pages on one side of the paper first.

Then, the Windows

driver instructs you (with a pop-up message) to reinsert the paper. Before reinserting

the paper, straighten it well, or you may get a paper jam. Very thin or very thick paper is not recommended.

✔

1 - 2