Epson ELPMB29 사용자 설명서 - 페이지 2

{카테고리_이름} Epson ELPMB29에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ELPMB29 12 페이지. Interactive table mount

Safety Instructions

For your safety, read all the instructions in this guide, the User's Guide for your projector, and Safety

Instructions before using this product. Incorrect handling that ignores instructions in these guides could

damage the product or could result in personal injury or property damage. Keep this guide at hand for future

reference.

The warning marks shown below are used throughout this guide to prevent personal injury or property

damage. Make sure you understand these warnings when reading this guide.

This symbol indicates information that, if ignored, could possibly result in personal injury or even death

Warning

due to incorrect handling.

This symbol indicates information that, if ignored, could possibly result in personal injury or physical

Caution

damage due to incorrect handling.

This symbol indicates relevant or useful information.

Symbol indicating an action that must

not be done

Follow the instructions in this guide when installing the product.

If the instructions are not followed, the product may fall or collapse, resulting in personal injury or an accident.

Handle the power cord carefully.

Incorrect handling may cause fire or electric shock. Observe the following precautions when handling:

- Do not handle the power plug with wet hands.

- Do not use a power cord that is damaged or modified.

- Do not pull the power cord with too much force when passing it through the base frame unit.

Do not install this product in a place where it might be subjected to vibration or shock.

Vibration or shock could cause damage to the projector or mounting surface. It could also cause this product or projector

to fall and cause serious personal injury or even death.

Inspect this product on a regular basis to ensure there are no broken parts or loose screws.

If there are any broken parts, stop using this product immediately. Otherwise, this product or projector may fall or

collapse, and cause an accident or personal injury.

Never modify this product.

Tighten all screws firmly after installation.

Otherwise, this product or the projector may fall or collapse, and cause personal injury or an accident.

Install this product on a table that meets the following conditions.

- The tabletop is 15 to 80 mm (0.6 to 3.1") thick.

- The tabletop is strong enough to support the weight of this product.

- The table is stable enough not to collapse after installation of this product (legs are not pointing inwards or collapsible,

for example.).

- The table is strong enough to take the weight of the projector and this product.

Do not use screw-locking adhesives, lubricants, or oil to install this product on a table.

If you use screw-locking adhesives, lubricants or oil on the attachment plate fixing part of the projector, the case may

crack and cause the projector to fall, resulting in personal injury or property damage.

Warning

Symbol indicating an action that should

be done