Epson ELPMB47 사용자 설명서 - 페이지 13

{카테고리_이름} Epson ELPMB47에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ELPMB47 16 페이지.

Tilting the Projected Images to the Right or Left

When the projected image is tilted to the right or left compared to the screen,

tilt the projector ±5 degrees to adjust the projection position.

Procedure

When the projected images are too big or too small for the screen, try adjusting the size of the

image on the projector first. For details on adjusting the size of the image, see the "User's Guide"

supplied with the projector.

To adjust the size of the image, you can slide the projector forward or backward by ±30 mm by

following the steps below.

Procedure

Loosen the four screws for the horizontal roll

adjustment points at the front and rear using

the supplied M8 hexagon wrench.

Tilt the projector to the left or right to adjust

the angle until the position of the projected

images fits the screen.

After adjusting the angle, secure the screws

on both sides using the M8 hexagon wrench.

Loosen the four screws for the front/rear slide

adjustment points on the left and right using

the supplied M8 hexagon wrench.

Slide the projector forward or backward to

adjust the projected image until it fits the

screen.

After adjusting the position, secure the

screws using the M8 hexagon wrench.