Ricoh Aficio MP C5000 사용자 설명서 - 페이지 8

{카테고리_이름} Ricoh Aficio MP C5000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio MP C5000 41 페이지. Papercut ricoh embedded manual
Ricoh Aficio MP C5000에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 빠른 참조 매뉴얼 (42 페이지), 빠른 시작 매뉴얼 (19 페이지), 빠른 시작 매뉴얼 (45 페이지), 문제 해결 매뉴얼 (23 페이지)

페이지 인쇄

PaperCut – Ricoh Embedded Manual

2.2.5 Configuring the Enhanced External Charge Unit (SDK 4.x+ devices only)

When installing application "403046912" on an SDK version 4+ device, the "Enhanced

External Charge Unit" must be enabled. NOTE: This setting can only be enabled by a

Ricoh technician. We recommend that this setting be changed when the Java VM card is

installed. Please contact your copier dealer/technician to arrange this.

The system setting:

SP-5113-2 (Option Counter->External Option Counter)

must be set to:

1: Expansion Device 1

IMPORTANT: Also verify that SP-5113-1 (Default Optional Counter Type) is set to "0:

None". If set to another setting it will conflict with the SP-5113-2 setting and the copier will

not work as expected.

(The device may need to be restarted for these changes to take effect.)

2.2.6 Disable the Document Server

The document server MFP functionality can be used to re-print documents that will not be

charged to the user. For this reason the document server should be disabled via the SP

paramters by a Ricoh Technician. PaperCut plans to address this in an update to the

embedded software in Q1 2013).

To disable the document server, the following system setting must be changed:

SP-5967-1: Copier Server

must be set to:

1: Off

2.2.6.1 Ensure Device Authentication and Key Counter is Disabled

For PaperCut to work properly the built-in authentication (e.g. user codes) should be

disabled as follows:

1. Select the "User Tools/Counter" " hard key (on the top left of the device panel).

2. Select the "System Settings" button

3. Select the "Administrator Tools" tab

4. Select the "User Authentication Management" button (usually on the 2

options)

5. Disable the authentication by selecting the "Off" button.

The Key Counter can also interfere with PaperCut, so ensure that is also disabled:

1. Select the "User Tools/Counter" " hard key (on the top left of the device panel).

2. Select the "System Settings" button

3. Select the "Administrator Tools" tab

4. Select the "Key Counter Management" button (usually on the 2

Revision: 19

2012-10-26

page of

page of options)

8 of 41