Cisco 1000 ISR Series 설치 및 연결 - 페이지 23

{카테고리_이름} Cisco 1000 ISR Series에 대한 설치 및 연결을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1000 ISR Series 27 페이지. This chapter describes how to install and connect cisco 1000 series integrated services router (isr) to lan and wan networks.

페이지 인쇄

Install and Connect the Router

Use the USB or RJ-45 console port on the router to access the Cisco Internet Operating System (IOS-XE)

command line interface (CLI) on the router and perform configuration tasks. A terminal emulation program

is required to establish communication between the router and a PC.

To configure the router through the Cisco IOS CLI, you must establish a connection between the router console

port and either a PC or a terminal.

Use the following cables and adapters to establish a local or remote connection.

Table 2: Local and Remote Connections

Port Type

Serial (RJ-45)

Serial (USB)

Connect to the Serial Port with Microsoft Windows

To establish a physical connectivity between the router and a PC, you need to install a Microsoft Windows

USB.

Use the USB Console cable plugged into the USB serial port to establish this connection.ß

1. Connect the end of the console cable with the RJ-45 connector to the light blue console port on the router.

2. OR

Connect a USB 5-pin micro USB Type-B to the USB console port. If you are using the USB serial port

for the first time on a Windows-based PC, install the USB driver.

Note

You cannot use the USB port and the EIA port concurrently. When the USB port is used it takes priority over

the RJ-45 EIA port.

3. Connect the end of the cable with the DB-9 connector (or USB Type-A) to the terminal or PC. If your

terminal or PC has a console port that does not accommodate a DB-9 connector, you must provide an

appropriate adapter for that port.

4. Start a terminal emulator application to communicate with the router. Configure the software with the

following parameters:

• 9600 baud

• 8 data bits

• no parity

• 1 stop bit

• no flow control

Connect to the Serial Port with Microsoft Windows

Cable

C111x,C1111X: RJ-45 Serial

console cable

CAB-CON-USB (Serial USB to

RJ-45 serial cable)

C110x: CAB-CON-USBRJ45

Action

Connecting to the Serial Port with

Microsoft Windows

Install and Connect the Router