Cisco 10005 설치 매뉴얼 - 페이지 7

{카테고리_이름} Cisco 10005에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 10005 20 페이지. Cisco systems power supply installation guide

Adding or Replacing an AC Power Supply

Installing a Second AC Power Supply

Warning

Step 1

Step 2

Step 3

Step 4

78-12652-01

This section describes how to add or replace an AC power supply in a Cisco 10005

chassis. It contains these procedures:

Installing a Second AC Power Supply

•

Replacing an AC Power Supply

•

Troubleshooting the Installation

•

Never install an AC power module and a DC power module in the same

chassis.

Follow these steps to install a second AC power supply for redundancy:

Put on an antistatic wrist or ankle strap. Attach the strap to the ESD grounding

jack on the front of the chassis or to a bare metal surface of the chassis.

At the rear of the chassis, loosen the captive screws to remove the blank cover

from the empty power compartment.

Before you install the new power supply, push on the left side of the power switch

to set the power supply to standby mode.

Insert the new AC power supply all the way into the power bay to ensure a secure

connection to the midplane

Adding or Replacing an AC Power Supply

(Figure

2). Tighten the captive screws.

Cisco 10005 ESR AC Power Supply Installation