Cisco 12000 - Series Chassis Modular Expansion Base 교체 지침 매뉴얼 - 페이지 6
{카테고리_이름} Cisco 12000 - Series Chassis Modular Expansion Base에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 12000 - Series Chassis Modular Expansion Base 40 페이지. Internet router line card failures
Cisco 12000 - Series Chassis Modular Expansion Base에 대해서도 마찬가지입니다: 데이터시트 (9 페이지), 개요 매뉴얼 (6 페이지), 하드웨어 문제 해결 매뉴얼 (18 페이지)
페이지 인쇄
GRP, PRP, and Line Card Memory Overview
Figure 2
SIMM socket on the PRP.
Figure 2
1
Backplane connector
2
Flash SIMM (Socket number P3)
SDRAM DIMMs
Bank 1 - Socket number U15
3
Bank 2 - Socket number U18
4
Ejector lever
5
Flash disk slots (covered)
The two route memory DIMM sockets on the PRP, labeled U15 (route memory bank 1) and U18 (route
memory bank 2), respectively, enable you to configure route memory in desired increments ranging from
512 MB to 2 GB.
Cisco 12000 Series Router Memory Replacement Instructions
6
shows the locations of the processor memory SDRAM DIMM sockets and the Flash memory
Memory Locations on the Cisco 12000 Series Router PRP
2
4
5
1
ETH 0
ETH 1
AUX
CONSOLE
7 8
6
6
Ethernet ports
7
Auxiliary port
Console port
8
9
Handle
10 Display LEDs
3
PERFORMANCE ROUTE PROCESSOR 1 (PRP-1)
9
10
78-4338-16