Epson EMP 730 빠른 참조 매뉴얼 - 페이지 5
{카테고리_이름} Epson EMP 730에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP 730 17 페이지. Esc/vp21 command user's guide for business projectors
Epson EMP 730에 대해서도 마찬가지입니다: 브로셔 및 사양 (24 페이지), 사양 (1 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지)
페이지 인쇄
Tip
If connecting the projector to a computer
with a built-in monitor, or to a laptop
computer, you may need to change the
output destination for image signals using
one of the buttons on the computer (such
as a button with a
or
icon on
it) or setting menus.
The output destination can normally be
changed by holding down the computer's
key and pressing one of the
Function keys.
Once the source has been changed, after
a short wait the projector will start
projecting.
For details, refer to the documentation
provided with your computer.
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
Macintosh
After startup, change the
Control Panel adjustments so
that Mirroring is active
If images do not appear ...
Change the input signal.
Each time
is pressed, the
image source cycles between
Computer/Component Video,
S-Video, and Video.
If you have other problems ...
Refer to the online
Help information.
Press
on the projector's control
panel and follow the prompts which
appear in order to solve the problem.
Projecting
Projector
Remote Control
Projector
* Refer to "Troubleshooting".