Cisco 12016 사용 설명서 - 페이지 5

{카테고리_이름} Cisco 12016에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 12016 16 페이지. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Cisco 12016에 대해서도 마찬가지입니다: 포장 풀기 사용 설명서 (28 페이지), 데이터시트 (9 페이지), 교체 지침 매뉴얼 (32 페이지), 교체 지침 매뉴얼 (18 페이지)

페이지 인쇄

Using the Scissor-Jack Platform

Procedures for using the scissor-jack platform to move a fully loaded chassis are described in the

following sections:

•

Moving a Router onto the Scissor-Jack

To move a fully loaded router from an equipment rack and onto the scissor-jack platform, follow these

steps:

Working from the top of the chassis down, remove the screws that secure the chassis to the mounting

Step 1

flanges on the rack (five screws on each side of the chassis).

Position the scissor-jack platform in front of the rack-mounting platform installed in the bottom of the

Step 2

rack, with the screw on the scissor-jack platform facing away from the front of the router and the back

of the scissor-jack platform butted against the front of the rack-mounting platform.

Use the 3/4-in (19-mm) socket and ratchet wrench to turn the scissor-jack screw counterclockwise and

Step 3

expand the scissor-jack platform so that the top of the platform is level with the top of the rack-mounting

table under the chassis. (See

Do not attempt to lift the chassis with the handles on the back and sides of the chassis. These handles

Warning

are not designed to support the weight of the chassis, and should be used only to steady and guide

the chassis while it is being inserted into or removed from an equipment rack. To reduce the risk of

damage to the chassis and serious bodily injury, do not use these handles to lift or support the chassis.

78-15717-01

Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide

Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions

Regulatory Compliance and Safety Information for the Cisco 12000 Series Internet Router

Moving a Router onto the Scissor-Jack

Moving a Router onto a Pallet

Figure

2.)

Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions

Using the Scissor-Jack Platform